BLOG

A transformer is a device that converts the voltage of an input current into another voltage output. Converting to a voltage lower than the input voltage is called step-down, and vice versa, converting to a voltage higher than the input voltage is called step-up. There are three power supply voltage standards: low voltage, high voltage, […]

Solar technology converts sunlight into electrical energy through photovoltaic (PV) panels or mirrors that concentrate solar radiation. This energy can be used to generate electricity or stored in batteries or thermal energy storage. Here we will tell you more about solar radiation and how we can capture it. How does solar energy work? Solar radiation

Voltage is the potential difference between two points created by an electric field. If two points with a potential difference (A and B) are connected by a conductor, electrons will flow. The point with a higher potential (A) will release some of its charge through the conductor to the point with a lower potential (B)

If we need to convert DC to DC, we usually need to use a device called a DC-DC converter. These converters change the voltage level of a DC power source to a different voltage level, either higher (step-up) or lower (step-down) without first converting it to AC. There are many types of DC-DC converters, each

A 120V to 12V inverter, also known as a step-down converter or voltage converter, is an electrical device that converts 120 volts of alternating current (AC) typically from a standard household electrical outlet to 12 volts of direct current (DC). These frequency inverters are used to power devices require 12V DC. For example, certain electronics,

In conventional power stations, fossil fuels such as coal, natural gas and oil are burned to produce high-pressure steam, which in turn drives a turbine that drives a generator to produce electricity. However, underground resources are limited and can produce harmful pollution. Wind turbines generate electricity by converting wind energy into mechanical energy, and then

Principles of Wind Turbines Instead of using electricity to create wind like a fan, a wind turbine uses wind to generate electricity. It usually consists of a tall tower, a rotating set of blades, and a generator. Wind turbines work by using the kinetic energy of the wind to push the blades to rotate, which

Inverters mostly work in high temperature, high humidity, dusty, corrosive gas and vibration environments, and the inverters have a long service life and have not been overhauled. The impact of the installation environment on the inverter is as follows: Working temperature. The inverter contains high-power electronic components, which are easily affected by the working temperature.

Cable and wiring method for determining the distance between the inverter and the motor The distance between the inverter and the motor should be as short as possible. This reduces the ground capacitance of the cable and reduces the interference of the emission source. The longer the cable, the greater the voltage drop. Long cables

Overheating of high-voltage inverters is a common fault phenomenon that may cause equipment damage and shutdown. Therefore, it is very important to detect and solve overheating problems in a timely manner. The air (wind) water-cooled closed cooling system of high-voltage inverters is a cooling system that combines air cooling and water cooling technology, designed to